GGP ITALY SPA MP 84 Series Operator'S Manual Download Page 45

Page: 45 / 55

EN - 21

12. WARRANTY COVERAGE

The warranty covers all material and

manufacturing defects. The user must

follow all the instructions provided in

the accompanying documentation.

The warranty does not cover

damages caused by:

•

Failure to become familiar with the

documentation accompanying the machine.

• Carelessness.

•

Incorrect or prohibited use or assembly.

• Use of non-genuine spare parts.

•

Use of attachments not supplied or

approved by the manufacturer.

The warranty does not cover:

•

Normal wear and tear of consumables,

such as drive belts, headlights, wheels,

blades, safety bolts and wires.

•

Normal wear and tear.

•

Engines. Engines are covered by

the warranty provided by the relative

manufacturer in compliance with the

specified terms and conditions.

The purchaser is protected by his own national

legislation. The purchaser’s rights envisaged

by the national laws in his own country are

not in any way restricted by this warranty.

13. MAINTENANCE TABLE

The boxes at the side are for you to mark the date or number of

working hours at which the intervention was made.

Operation

Frequency

(hours)

Completed (Date or Hours)

Notes

MACHINE

Safety checks/check controls

Before

each use

par. 6.2

Tyre pressure check

Before

each use

par. 6.1.3

Assembly/Checking of outlet guards

Before

each use

par. 6.1.4

General cleaning and inspection

After each

use

par. 7.4

Checking for any damage to the

machine. If necessary, contact the

authorised assistance centre.

After each

use

Battery power reserve

Before

storage

par. 7.5

Complete bolt and screw check

Cutting means positioning

and sharpening check

***

Transmission belt check

***

Cutting means control belt check

***

Brake regulation and check

***

Drive regulation and check

***

Cutting means gear and brake check

***

General lubrication

****

Replacing cutting means

100

***

Replacing the transmission belt

** / ***

Replacing the cutting means control belt

** / ***

* See the engine manual for the full list and frequency

** At the first signs of any malfunction, contact your Dealer immediately

*** The operation must be carried out by your Dealer or a specialized Service Centre

*** General lubrication of all joints should also be carried out whenever

the machine is to be left unused for a long period.

Summary of Contents for MP 84 Series
























































Search results

Summary of Contents for MP 84 Series

Reviews:

GGP ITALY SPA MP 84 Series, Operator'S Manual, Page: 45 / 55

Search results

Summary of Contents for MP 84 Series

Reviews: