10
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
EN
1)
Warning! Danger
2)
Read the instruction booklet before using this
machine.
3)
Your hearing is at risk of irreparable damage.
Anyone operating this machine under normal
conditions during continuous daily use may be
exposed to a noise level equal to or exceeding
85 dB (A). The operator must wear Personal
Protective Equipment (PPE). Whenever the
machine is in use, safety goggles must be worn
to safeguard against flying objects, as must ear
protectors, such as a soundproof helmet, in
order to protect the operator’s hearing. If the
operator is working in an area where there is a
risk of falling objects, a safety helmet must also
be worn.
4)
Wear protective footwear and gloves!
5)
Danger: objects thrown up by machine!
Keep people or animals at least 15 m away from
the machine during operation!
•)
Work in an obstacle-free area, choosing the
most suitable tilt of the cutting unit in relation to
the ground. Make sure it is correctly fitted on the
brush cutter.
•)
Always work in a stable position. Do not use
ladders. Use platforms if required.
1. Blade unit
2. Blade guard
3. Screw for fixing unit to brush cutter
4. Sector for angular adjustment
5. Grease nipples
6. Clamping nut
7. Blade guiding screw
8. Spacer washer
9. Sleeve
10. Spacer (only for mod. Ø 26)
11. Drive tube
1. IDENTIFICATION OF MAIN COMPONENTS
2. SYMBOLS
WARNING: The machine you have purchased has been manufactured for domestic use.
11
10
9
3
4
5
5
1
5
2
8
7
6
1
2
3
4
5
Summary of Contents for HEDGE TRIMMING DEVICE
Page 3: ...2...