18.
This grinder uses a grounded, three prong plug (hot, neutral and ground), that should be
connected directly to a grounded 220 Volt, 50 Hz three prong grounded wall outlet
receptacle. Grounded plugs are used on metal-encased electric appliances in order to
provide protection from an electric shock.
DO NOT
change or alter the plug in any way.
NEVER break off a grounding prong from a 3-conductor plug. Doing so voids the warranty
and can result in electric shock.
19.
Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near the
edge of the worktop, where it can be easily pushed off or fall.
20.
The Gear Housing and the Motor Cover may become HOT during operation. This is normal. DO
NOT TOUCH these parts while operating.
21.
DO NOT attempt to operate the Grinder if the Grinder, Motor and Gear Box are cold. Grinder,
Motor and Gear Box temperature should be at least 45˚F (7˚C) before beginning.
22.
To reduce the risk of unintentional starting, check that the control is OFF before plugging the
cord into wall outlet. To disconnect, turn the control to OFF, then remove plug from wall outlet.
23.
DO NOT operate your grinder under a wall cabinet. When storing, always unplug the unit from
the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches
the walls of the garage or the door touches the unit as it closes.
24.
NEVER plug the grinder in where water may flood the area.
25.
To protect against risk of electrical shock, DO NOT submerge the grinder in water or other
liquids. Be sure the grinder is disconnected from the power source before cleaning. NEVER rinse
the Grinder Motor under running water, only use a moist cloth to clean the Grinder Motor Unit.
26.
DO NOT operate grinder with wet hands or while standing on a wet floor.
27.
The use of attachments or parts not specifically recommended or sold by the manufacturer for
this grinder will void the warranty and may cause fire, electric shock or injury
28.
HAND WASH ALL PARTS! DO NOT USE DISHWAHER. Never put the unit near a hot burner, in an
oven, or in a dishwasher.
29.
NEVER use abrasive cleaning agents or abrasive cloths when cleaning the grinder.
30.
DO NOT
use the grinder for other than intended use.
31.
DO NOT RUN Grinder without meat in the Grinder Head. Severe damage to the Head and
Auger may occur.
32.
Never turn on and run the meat grinder for more than 10 seconds dry with no meat inside the
machine. The friction between the auger and grinder head will result with high heat causing the
meat to stick to the inside of the grinder assembly. NEVER OPERATE DRY. Damage from dry
operation will void the warranty.
33.
Be sure the Grinder is on a stable work surface. Be sure all the Grinder Feet are stable.
34.
DO NOT attempt to grind bones, nuts or other hard items.
35.
WEAR EYE PROTECTION. Wear safety glasses. Everyday eye glasses are not safety glasses. Safety
glasses conform to ANSI Z87.1 requirements. Note: approved safety glasses have Z87 printed or
stamped on them.
36.
The Manufacturer disclaims any responsibility in the case of improper use of Grinder. Improper
use of the Grinder voids the warranty.
37.
DO NOT use Grinder while under influence of drugs or alcohol.
SAVE THESE INSTRUCTIONS
Refer to them every time you operate or disassemble this product.
IMPORTANT PRODUCT FEATURES YOU SHOULD KNOW
