Batch No.WMI16579(PO#2653)
Page 2 of 12
STOCKHOLM 1 DRAWER NIGHTSTAND
ASSEMBLY INSTRUCTIONS
INFORMATION
WARNINGS
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT sit or stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
This product is intended for a maximum load of 20 kg spread evenly thorough the storage
compartments. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
DO keep small parts out of reach of children.
Tools are not included.
This product should only be used on firm, level ground.
DO make sure the legs remain in contact with the ground.
