Hints and Tips
To operate the ottoman, always use 2 hands at arm's length and only where illustrated
on this product. You must ensure the mattress is on the bed frame before lifting the
mechanism.
Failure to do so may result in injury.
re are many small components used
in the construction of this product. Please keep these components away from young
children
whilst assembling this product.
If removing the mattress, make sure the frame is secured so it does not flip open.
When lifting the bed frame, remove pillows and covers.
PLEASE NOTE
- It takes a lot of force to make the initial movement of the ottoman -
THIS IS A DESIGN FEATURE OF THE PRODUCT SO THAT IT DOES NOT FALL
SHUT
- and the nearer to being closed the ottoman is, the easier it is to move. When
the ottoman is almost shut, it will close completely under its own weight.
When lowering the slat unit for the first time, take care to make sure it does not rub
unevenly on the inside face of the Side Rail. If it does, the bed has been assembled
slightly out of square. This can be rectified by moving the Footboard of the bed slightly
to the left or right whilst leaving the headboard
of the bed frame stationary.
Tip for difficulty with compression:
If you are experiencing difficulty with the initial compression try fitting one piston at
a time (following the Assembly Instructions) then press down on the side of the frame
with the piston fitted - this acts like a big lever (The weight of the mattress can be used
to supplement the load exerted). Effectively you are doubling the amount of force
applied, because you have halved the resistance offered by the pistons. It can take
slightly more effort than you might feel comfortable applying to the bed frame at first.
Batch no:V1 - 09/21
Page 7 of 18
MILAZZO OTTOMAN BED ASSEMBLY INSTRUCTIONS