KOLN 4
’
6
”
/5
’
DRAWER BED
ASSEMBLY INSTRUCTIONS
Batch No.: WMI16578 (PO#2637)
Page
2
of
10
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
INFORMATION
This product is intended for a maximum person’s weight of 110kg per side. Do not exceed this
weight.
Incorrect install
a�
on could lead to injury, take care following instru
c�
ons.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
flo
or to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled and secured as illustrated before use.
Check all screws or bolts ar
e �
ghtened and inspect regularly.
This product should only be used on
firm
, level ground.
Dismantle for transport
a�o
n.
Only use recommended accessories.
Tools are included.
WARNINGS
Only use the drawer storage if there is enough room to extend the drawers.
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.
DO NOT overload drawers.
DO NOT use power tools to construct this product.
DO NO
T �g
hten screws u
n�l
fully assembled.
DO NOT o
ver �g
hten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
DO NOT stand on the product.
When moving the bed always
li�
carefully into po
si�o
n. NEVER DRAG OR PULL YOUR BED
OTHERWISE THIS COULD DAMAGE ESSENTIAL COMPONENTS.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product
