Page
2
of
7
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
•
Never use scourers, abrasives or chemical cleaners.
•
To clean, wipe with a damp sponge and warm soapy water.
•
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
•
Each table is designed to hold 10Kg in total. Do not exceed this weight.
•
We recommend that this unit is assembled in the room intended for use.
•
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
•
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from getting scratched.
•
Check the pack and make sure you have all the parts listed.
•
Ensure that this product is fully assembled as illustrated before use.
•
Check all screws or bolts are tightened and inspect regularly.
•
Tools not included unless specified in the parts list.
•
This product should only be used on a firm and level floor.
•
Please do not drag across the floor or carpet as legs may be damaged - lift into place.
•
Make sure the legs remain in contact with the floor when being used.
•
Keep small parts out of reach of children.
•
DO NOT
•
DO NOT
•
DO NOT
•
DO NOT
•
DO NOT
•
DO NOT
use tables for 12 Hours to allow dowel glue to dry - see Steps 2 & 3.
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the Tables.
JAKARTA LONG JOHN NEST OF TABLES - ASSEMBLY INSTRUCTIONS
Version 1 - 010120
