CHICAGO BED ASSEMBLY INSTRUCTIONS
Batch no.: WMI 14698
Page
2
of
6
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
INFORMATION
This product is intended for a maximum person’s weight of 80kg per side. Do not exceed this weight.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry
area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean floor
to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled and secured as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Please dismantle for transportation
Tools are included.
WARNINGS
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents
as they can bleach or damage the product.
