Page 2 of 16
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
·
This product is intended for a maximum weight of
60
kg. Spread evenly throughout the cabinet.
Do not exceed this weigh.
·
Due to the size
of this product we recommend that it is assembled in the room intended for use.
·
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
·
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
·
Check the pack and make sure you have all the parts listed.
·
Ensure that this product is fully assembled as illustrated before use.
·
Check all screws or bolts are tightened and inspect regularly
·
This product should only be used on firm, level ground.
·
Keep small parts out of reach of children.
·
Make sure the legs remain in contact with the ground.
·
Tools not included.
WARNINGS
·
DO NOT use power tools to construct this product.
·
DO NOT tighten screws until fully assembled.
·
DO NOT over tighten screws or bolts.
·
DO NOT
use this product if parts are missing, damaged or worn.
·
DO NOT
sit or stand on the product.
·
We recommend the use of the wall strap provided for safety reasons. N.B. Wall fixings are not
included – please source suitable fixings for your wall type. If in doubt please consult a qualified
tradesperson.
·
Warning
: Always ensure the area to be drilled is free from hidden electrical wires, water and gas
pipes.
·
It is essential that this unit is fixed to a wall with the fixings provided
CARE INFORMATION
·
Never use scourers, abrasives or chemical cleaners.
·
To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
·
Do not use washing powders or any other substances containing abrasives, as these may scratch.
AZTEC 3 DOOR ROBE ASSEMBLY INSTRUCTIONS
Version 1 11/17
