The GfS Exit Cover D2 is used to secure security latches. The cover is
made out of the transparent and unbreakable material Makrolon.
In case of an emergency the cover can be lifted by force. The pins of
the patented red clips break and the cover falls down. The cover can
be reused. Only the red upper plates have to be replaced.
1. Mount the two green under plates with the accompanying screws
on the frame.
2. Fix one red upper plate onto the lower green under plate. Insert the
GfS Exit Cover Type E and fix the second red upper plate with the
upper fastening lug onto the upper green under plate.
3. Glue the provided pictogram on the GfS Exit Cover Type E.
Delivery includes
• 1x GfS Exit Cover D2
• 2x green under plates
• 6x red upper plates
• 1x picto
• 4x screws
GfS
Sicherheit an Türen
901480_Cover_T
ype D2_0919
Subject to technical changes
Cover Type D2
Part No: 901 480
GENERAL INFORMATION
Waste electrical products should not be disposed of with household waste!
Dispose of the waste product via a collection point for electro nic scrap or via your specialist
dealer.
Put the packaging material into the recycling bins for card board, paper
and plastics.
WARRENTY
Within the statutory warranty period we undertake to rectify free of charge by repair or
replacement any product defects arising from mate rial or production faults.
Any unauthorized tampering with, or modifications to the product shall render this warran-
ty null and void.
CUSTOMER SERVICE
If, despite correct handling, faults or malfunctions occur or if the pro duct was damaged,
please contact the company at the address below
GfS – Gesellschaft für Sicherheitstechnik mbH
Tempowerkring 15 ∙ 21079 Hamburg ∙ Fon +49 40-79 01 95-0 ∙ Fax +49 40-79 01 95 11 ∙ www. gfs-online com ∙ [email protected]
72
80
56
272
297
32
72
32
297
32
80
42
56
32