Gfp FT60
March 2019
13
NOTE:
Make sure the power cord is unplugged from the wall outlet before moving the
finishing table.
10B. Illuminating the cutting surface
Insert the plug of the power cord into a 110-120 VAC outlet, press the power switch to turn
on the LED lights under the cutting mat.
10C. Feeding rigid substrates
Rotate the table to the ball bearing side. Line up the guide plate to match the width of the
substrate to be laminated or mounted.
Slide the table up to the feed table of the laminator or printer.
Cutting table light switch
Power cord and fuse