Gfp 865DH-4
March 2021
11
8 E. Attach Lower Supply Shaft Assembly
1.
Bolt the bottom supply shaft assembly to the stand with 6 bolts by sliding the
shaft through the hole on the left side of the left stand
2.
Bolt the cover to supply shaft assembly
3.
Bolt machine alignment brackets to the outside of machine stand
5.
Bolt the swingout shaft assembly to the stand with 6 bolts.
6.
Bolt the cover to swing shaft assembly.
7.
Bolt the machine alignment brackets to the outside of the machine stand.
Cover
Bottom supply shaft
assembly
Machine alignment
brackets
Brake
tension
adjustment
knob
Slide this end of the shaft
through the bracket hole
of the left stand
Lower Unwind Shaft
hole of left stand
