![GForce G6P Instruction Manual Download Page 20](http://html.mh-extra.com/html/gforce/g6p/g6p_instruction-manual_2219658020.webp)
SPECIFICATION
36
37
G6P
G6P
Input Voltage: AC Input: 100-240V /DC Input: 11-18V
Controls: Enter/Start Rotary Dial, Mode/Stop Button
Display Type: 63.40*14.54mm LCD screen
Display Backlight: Blue
PC Communications: USB Port for PC Control & Firmware Upgrade
Case Material: Aluminum
Cooling System: Bult-in, one 50x50x15mm fan
Case Size: 141.2x123.2x101.5mm
Weight: 1023g
Delta Peak Detection: NiCd: 3-15mV/cell NiMH: 3-15mV/cell
Trickle Charge: 50-300mA
Charge Cutoff Temperature: 20-80°C (adjustable)
Charge Voltage: NiCd/NiMH: Delta peak detection LiPo: 4.18-4.3V/cell
LiIon: 4.08-4.2V/cell LiFe: 3.58-3.7V/cell
Balance Current: 200mA/cell
Reading Voltage Range: 0.3-5.0V/cell
Battery Types/Cells: NiCd/NiMH: 1-15cells
LiPo/LiIon/LiFe: 1-6cells Pb: 2-20V
Battery Capacity Range: NiCd/NiMH: 0.1-1.1V/cell
LiPo/LiIon/LiFe: 100-50,000mAh
Pb: 100-50,000mAh
Charge Current: 0.1-10.0A
Safety Timer: 1-720 minutes, Off
Charge Wattage: 80W
Discharge Current: 0.1-5.0A(±10%)
Discharge Cut-off Voltage: NiCd/NiMH: 0.1-1.1V/cell
LiPo: 3.0-3.3V/cell LiIon: 2.9-3.2V/cell
LiFe: 2.6-2.9V/cell Pb: 1.8V
Discharge Wattage: 8W
Balance Cells: 6 cells
Memory: 10 different charge/discharge profiles
Charge Method: CC/CV for lithium types and lead (pb) batteries,
Delta-peak Sensitivity for NiMH/NiCd.
INSTRUCTION MANUAL FOR EXTERNAL POWER SUPPLY
Active PFC Design: smaller AC input current, less interference,
and conform to CE regulations
Three DC power outputs, total output power up to 18A
ON/OFF switch
9 LEDs indicate output power from minimum to maximum
Built-in USB power, 5V/2.1A for iPad, mobile phone, digital camera
and etc
AC 100-240V worldwide operation
Smart cooling fan turned on upon the temperature automatically
with low-noise
Over current and over temperature protection
Short-circuit protection on output, safe and reliable
CONNECTIONS
Caution: Make all other connections before you connect the power
supply to standard AC power
Always connect the red (+) positive lead from your charger or other DC
device to the red (+) positive terminal on the power supply, and the
black (+) positive lead from your charger or other DC device to the
black (+) positive terminal on the power supply.
FEATURES
The external 230W/12A power supply can be the power source of the
upper charger, but can also be used separately. It can converts
standard household 100-240V to 12V DC power and can supply max
18A continuous current.
Warnings: To avoid damage to both the power supply and the device:
Follow the correct polarity when connecting the power supply and the device.
Do not let the ends of the positive and negative wires touch each other.