2
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted
material without permission.
Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448; and 6,516,132 licensed for limited viewing
uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
W A R N I N G :
W A R N I N G :
W A R N I N G :
W A R N I N G :
W A R N I N G : Should any problems occur, disconnect the AC cord and refer servicing to a
qualified technician.
SAFETY PRECAUTIONS
* SEE REAR OF UNIT FOR GRAPHIC
* SEE REAR OF UNIT FOR GRAPHIC
* SEE REAR OF UNIT FOR GRAPHIC
* SEE REAR OF UNIT FOR GRAPHIC
* SEE REAR OF UNIT FOR GRAPHIC
SYMBOLS *
SYMBOLS *
SYMBOLS *
SYMBOLS *
SYMBOLS *
The exclamation point within a triangle
alerts you to the presence of important
operating, maintenance and servicing
instructions in this user’s manual.
The lightning flash with an arrowhead
within a triangle alerts you to
uninsulated dangerous voltage within
the product's enclosure that could
cause an electric shock.
WARNING : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON
OR NEAR THIS UNIT.
CAUTION : USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION : DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY WITH
THE SAME OR EQUIVALENT TYPE.
The symbol for
Class II
(Double lnsulation)
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
This product
contains a low
power laser device.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
AVIS
RISQUE DE CHOC ÉLECTRIQUE NE
PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PLACEMENT INFORMATION
•
Do not use this unit in places which are extremely hot, cold, dusty, or humid.
•
Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with
a cloth, or by placing it on bedding or carpeting.
SAFETY INFORMATION
•
When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord
may damage it and create a hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC cord.
CONDENSATION INFORMATION
•
When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the unit. When there is condensation inside the unit, the unit may not function normally. Let
the unit stand for 1-2 hours before turning the power on, or gradually heat the room and let the unit
dry before use.
FCC INFORMATION
W A R N I N G :
W A R N I N G :
W A R N I N G :
W A R N I N G :
W A R N I N G : Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
N O T E :
N O T E :
N O T E :
N O T E :
N O T E : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
c o n n e c t e d .
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class FCC limits.
211501S9 - GFM-1.pmd
01/06/2007, 18:30
2
