gfm TDC531K Instruction Manual Download Page 4

5.2 Inserting a memory card (not included) 

This camera has built-in internal memory. This memory can be extended with 
a SD memory card (not included). 
Follow the instructions given below to insert the optional SD memory card into 
the camera. 
1.

 

Turn off the camera first. 

2.

 

Insert the SD card into the camera. 

 

Note: There is only one right direction to insert the SD memory card into the 

slot. Do not force the card into the slot, or else it may damage both the 
camera and the SD memory card. 

 

Note: The SD memory card must be formatted before taking photographs. See 

the following sections for more information. 

 

5.3 Formatting the memory or SD card 

1.

 

Press Menu button 

2.

 

Select Setup setting by using the right key. 

3.

 

Press OK to confirm and select by up or down key.   

4.

 

Press OK to format the card or memory. 

 

5.4 Setting the resolution 

The camera can be set to different resolutions. 
1.

 

Press MENU to set the proper 

size (resolution)

 

Resolution: VGA

640 X 480

1.3M

1280 x 960

, 3.1M (2048 X 1536),   

5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024) 

2.

 

Six different resolutions will be displayed. Select the desired resolution 
by using the 

 or 

buttons and then press the OK button to confirm the 

selection. 

 

5.5 Taking photographs

 

1.

 

      Turn on the camera on by pressing the ON/OFF button. 

2.

 

      Press MODE to set the camera to photo mode ( ). 

3.

 

     

Depending on the distance of the object being photographed, use the 

Macro switch

 

to adjust the distance. Select the flower symbol ( ) if you 

wish to take a close-up photograph (0.4 ft. – 0.6 ft.).     

If you wish to take photographs of surroundings or people (1.6 ft. - 
infinity), set the macro switch to normal mode ( ). 

4.

 

    If you are not sure if there is enough lighting, turn the automatic flash ( ) 

on by pressing the flash button. (If the battery power is low, the flash 
cannot be activated). 

5.

 

    Use the LCD screen to aim the object you wish to photograph. 

6.

 

    Press the Shutter button and hold the camera steady for 2 to 3 sec., until 

the LCD display turns on again. 

 

Caution: 1) Taking picture for fast-moving object is not recommended. 

2) Image may be distorted when taking picture in a moving vehicle. 

 

5.6 Zooming in and out 

The camera can zoom in up to 8 times. 
1.

 

Press the 

 or

 button to Zoom in. A number will appear on the display. 

8.0 is the maximum zoom.   

2.

 

You can zoom in by pressing the UP or DOWN button. 

 

5.7 Taking photographs using the self-timer function 

You can use the self-timer function when you wish to take a photograph of 
yourself or when you wish to photograph an object where the camera must be 
as still as possible, for example, when using a tripod.

 

1.

 

Set the camera to photo mode. 

2.

 

Press the MENU button. The quick menu will appear. 

3.

 

Press 

 to self-timer mode, press OK and 

or 

 to set the delay time: 2 

seconds, 10 seconds, 10+2 seconds or off.   

4.

 

Press the OK button to confirm. The self-timer function is now ready for 
use. 

5.

 

Aim at the object you wish to photograph. 

6.

 

Press the shutter button to take a photograph. 

7.

 

The self-timer indicator LED in the front will blink. 

8.

 

The photograph will be taken after the timer reaches the delay time that 
you have pre-set, and the camera will beep once.   

5.8 Recording video clips 

1.

 

Press the MODE button to select video mode. 

2.

 

Press the shutter button to start recording video, press the shutter button 
again to stop recording. The video clip will now be saved as an AVI file in 
the camera memory. 

3.

 

Press MENU to set the proper resolution, 

Exposure Value (EV) and White 

Balance (WB)

, and press OK to confirm. 

 

5.9 Playback photographs 

1. 

Press PLAYBACK button, press   or    to select the video clip or photo. 

2. 

Press

,

 to zoom in or out the image. 

3. 

Press ok and then press 

,

,  or    to shift the image. 

4. 

Press MENU to select SLIDE SHOW, and then press OK to confirm. The 
pictures saved in your camera or your SD card will be displayed in 
sequence automatically. 

5. 

Press ok to 

stop

 the SLIDE SHOW. 

 

5.10 Playback video clips 

1.

 

When video clips are displayed, press OK to play, and press the DOWN key 
to stop.   

2.

 

Press OK to pause the playback. 

3.

 

Press the Playback key to exit. 

 
 

5.11 Recording voice 

1.        Press MODE button to select the voice-recording mode.   
2.        Press the SHUTTER to start voice recording and press it again to stop. 

 
 

Summary of Contents for TDC531K









Reviews: