7
BATTERY OPERATION
1. Remove the battery door.
2. Install 6 x DC1.5V “AA” (UM-3) batteries (not included) according to the polarity diagram inside the
battery compartment.
3. Close the battery door.
IMPORTANT:
Be sure that the batteries are installed correctly.
Wrong polarity may damage the unit and void the warranty.
For best performance and longer operating time, we recommend the use of good quality
alkaline-type batteries.
CAUTION
1.
Do not mix old and new batteries.
2.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3.
If the unit is not to be used for an extended period of time, remove the battery. Old or leaking battery can
cause damage to the unit and may void the warranty.
4.
Do not dispose of batteries in fire, batteries may explode or leak.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted or the CD player operation appears unstable, the
batteries are weak. You need to replace all the exhausted batteries at the same time as soon as possible to
avoid battery leakage.
RADIO OPERATION
1.
Slide the FUNCTION SWITCH to your desired radio band (AM or FM).
2.
Rotate the TUNING KNOB to your desired radio station according to the dial scale on the knob.
3.
Rotate the VOLUME CONTROL to adjust to the desired output level.
4.
To turn off the radio, slide the FUNCTION SWITCH to “OFF”.
TIPS FOR BEST RECEPTION
AM – The AM antenna is located inside the cabinet of the main unit. If AM reception is weak, change the
position of cabinet until the internal antenna picks up the strongest signal,
FM – During FM reception, always keep the FM Telescopic Antenna fully extended. If FM reception is still
weak try repositioning the unit near an open window until you get the best reception.
AUXILIARY INPUT (AUX) OPERATION
You can play other music sources (MP3 player or other digital audio player) through the speakers of this
system.
1. Plug one end of an appropriate audio cable (not included) into the AUX IN Jack of this unit and the other
end to the line out or headphone jack of your digital audio player.
2. Slide the FUNCTION SWITCH to the “AUX” position.
3. Start playing your digital audio player and gradually increase the volume output (if necessary) until a clear,
undistorted sound is heard from the speakers of this unit.
4. Adjust the VOLUME CONTROL until you reach a comfortable listening level.
CD OPERATION
NOTE: This unit not only plays commercial compact discs but also self-complied CD-RW discs.
•
Because of non-standardized format definition/production of CD-R/RW, playback quality &
performance are not guaranteed.
•
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as
PC performance, writing software, media ability, etc.
•
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAY MODE
1.
Slide the FUNCTION SWITCH to the “CD” position.
