9
The Algorithms
Infinity
This mode allows you to capture a brief snapshot of the sound you are playing,
and hold it indefinitely, then you can play over it (with reverberation). Later on, you
can fade out the sustained sound, and immediately fade in a new one. Here’s how
you do it :
1. Adjust
Blend
and
Decay
knob to get the desired amount of reverb mix and
reverb time. Leave
Damping
and
Intensity
knobs at midpoint.
2. Press and hold [Select / Atmosphere], when both LEDs starts flashing the pedal
began to continuously capture a snapshot of whatever you are playing. When
you release the footswitch, the pedal will take the last 0.25 seconds of the
captured sound and hold it indefinitely.
3. Now adjust
Intensity
and
Damping
to get the desired level and tonality for the
sustained sound. The Intensity knob runs backward : the sound gets more
intense as you turn counter-clockwise.
*
Do not turn the Intensity knob all the way to the right (clockwise), doing this
will shutdown the sustained sound
.
Now you can play over the sustained sound, and when you want to change the
sustained sound with a new one, simply repeat step-2; the current sustained
sound will fade out and then you can fade in a new one. The new sound will fade
in to the level you’ve set previously.
Blend
Decay
Damping
Intensity
controls intensity
controls tonality
standard reverb control
for the infinite sustained part of the sound
