Click on Personalized Programming in the main control panel. Open the programs overview page then click on the icon at the top right of the screen to add a
program
Now start the programming procedure by clicking on Start Irrigation, then set the program start time (hours-minutes) and click on OK. Click on Days and select the
preset program duration minutes, or select Cancel to go back. Finally, select the days of the week when you want the program to start and then click on Save
The program you have just set up will be shown in the overview page. To add a new program re-select the
icon at the top right of the screen. IMPORTANT: You
can set a maximum of 4 program starts per day.
To delete a program, go to Personalized Programming, select the set program and then select Delete timer.
The indication ON or OFF appears in the main control panel alongside Personalized Programming, depending on whether or not the function is selected
If this function is selected, the application automatically recognises the current season and adapts the duration of the previously set programs to avoid wastage of water.
Click on Smart Eco then select or deselect the function by clicking on the icon at the bottom right of the page. If the icon is LIGHT BLUE, the function is on, while if it is
GREY, the function is off.
The indication ON or OFF appears in the main control panel alongside Smart Eco, depending on whether or not the function is selected.
IMPORTANT: the Function does not replace the program/programs, but rather adapts the duration of a previously set program(s). You must therefore set at least one
program (Preset or Personalized)
Based on the next 5 days, you can increase or decrease the duration of previously set programs manually in accordance with forecasts for very hot or very rainy weather
Click on Very hot weather / rainy weather in the main control panel. To set a percentage increase or decrease of the duration of previously set programs, move the
green bar to the left (to decrease by up to –70%) or to the right (to increase by up to +70%). Click on the Period icon to select the program duration period (1,2,3, 4 or 5
days after the current date). Then select Save.
To disable the function re-click on Very hot weather / rainy weather and then click on Stop.
The indication ON or OFF appears in the main control panel alongside Very hot weather / rainy weather, depending on whether or not the function is selected.
IMPORTANT: the Function does not replace the program/programs, but rather adapts the duration of a previously set program(s). You must therefore set at least one
program (Preset or Personalized)
4.2 PERSONALIZED PROGRAMMING
4.3 SMART ECO
4.4 VERY HOT WEATHER / RAINY WEATHER FUNCTION
5. FAQ
- Forgotten password:
•
The password is displayed in «info» by clicking at the top right of the control panel
- User device (smartphone, tablet, etc.) unable to recognise programmer
•
Make sure Bluetooth® is enabled on your device (smartphone, etc.)
•
Check the programmer battery charge level
•
Make sure the programmer registration procedure has been performed correctly – see point 2 «register device», specially in the part concerning the
flashing LED (fig. 4)
- User device (smartphone, tablet, etc.) takes a long time to connect to the programmer
•
Make sure Bluetooth® is enabled on your device (smartphone, etc.)
•
Check the programmer battery charge level
•
Repeat the scan in the registration page by clicking on the icon at the top right
- You need to replace a dead battery
•
Refer to fig. 2 and 3 in the «register device» section.
•
IMPORTANT: when you change the battery, all previously saved programs and settings will be lost
It is essential to use the GFPRO app, which can be downloaded for free from the App Store and Play Store.
MINIMUM REQUIREMENTS FOR USE OF THE GFPRO APP:
- Bluetooth® 4
-
iOS 8
-
Android 4.4
4. PROGAMMING
Click on Preset Programs in the main control panel. Select the icon for the required program (Above-ground Irrigation or Drip Irrigation) then select Save
To deselect previously selected programs, click on Preset Programs again and then on Cancel.
The indication ON or OFF appears in the main control panel alongside Preset Programs depending on whether or not the function is selected.
4.1 PRESET PROGRAMS
EN
6
https://www.kipogeorgiki.gr/
https://www.kipogeorgiki.gr/
