Installation Instruction
Manual
30
5.
Loosen the screw
2
on the electrical position indicator.
6.
Unscrew the transparent, protective cover
3
.
7.
Pull upper cam
5
off.
8.
Loosen the threaded bolt
4
9.
Pull the base
6
with the spindle
7
out of the housing.
10.
Screw the base
6
with a wrench into the adapter.
11.
Screw the spindle
7
with an Allen key into the spindle nut of the actuator (Attention: left
thread).
12.
Place housing on base
6
:
-
Make sure that the electrical connection is in the desired position.
-
Secure threaded bolt
4
.
13.
Put upper cam
5
on the spindle
7
.
14.
Do electrical connections according to chapter 7 „Electrical Connections“.
