Revolving door TSA 325 NT
85
Revolving door TSA 325 NT RC 2
6.3.24 Installing stop buffers
X
Align the door stop (1) to the outer roller
carriage.
X
Tighten the screw (2).
6.3.25 Adjusting the LV door leaves
X
Observe the applicable standards and guidelines on crushing, shearing and drawing-in spots.
X
Align door leaves flush with each other. Ensure the same height and parallel closing edges when doing so.
X
Fine-adjust the height and parallel position of the door leaves at the hexagon of the suspension bolts (2).
X
Tighten the lock nut (1).
X
When the position of the door leaves is cor-
rect, tighten the hexagon socket-head screws
(4) lightly and secure with lock nuts (3).
