TS 5000 E BG
GB 6
Mounting and securing
6.5 Adjusting electrical hold-open device
X
Open door leaf to desired hold-open angle and fix it there (
1.
).
X
Remove cable protection foils from guide rail (
2.
).
X
Loosen clamping screws of electrical hold-open device (
3.
).
X
Move electrical hold-open device until catch contacts sliding block (
4.
).
X
Screw down electrical hold-open device securely (
5.
).
X
To prevent loops from forming, tighten cable and fasten cable protection at hold-open device end (
6.
).
X
Store cable in cable protection and in upper cable chamber behind electrical hold-open device (
7.
).
X
Secure stored cable with cable protection foil (
8.
).
CAUTION!
X
Check free upward movement of the rocker!
9.
Fig.: 6.5.1
If necessary, the holding force can be adjusted (
9.
). According to EN 1155, the release torque should
amount to 40 Nm - 120 Nm for a door with 90° hold- open angle.
6.6 Mounting cover panel
X
Clip on cover panel.
CAUTION!
X
Do not pinch cable.
Fig.: 6.6.1
