11
Integrierte Schließfolgeregelung Bandgegenseite Slimdrive SD, Datei SD_IS-BGS_*.p65
Installation ”1
st
closing leaf DIN right”
Installing
Slimdrive SD-IS
on the side of the 1
st
closing leaf
SD-IS: identifiable by the valve lever next to the spindle drive.
Valve lever (and rope) at the bottom.
Installing
Slimdrive SD
or
TS 5000
on 2
nd
closing leaf side
The U-shaped driver has to be mounted on this side of the drive:
Important: Thoroughly grease all parts before mounting!
Put driving plate on top and with nose pointing to screwing surface
in accordance with illustration.
Slip U-shaped accessory part (all sliding surfaces thoroughly
greased!) from the rear onto the screwing surface of the drive.
TS 5000 only:
Take note of the shims as distance piece for the driver to be mounted.
Installation ”1
st
closing leaf DIN left”
Installing
Slimdrive SD-IS
on the side of the 1
st
closing leaf
SD-IS
:
identifiable by the auxiliary valve lever next to the spindle drive (see illustration above, respectively). Valve
lever and rope on the top.
Installing
Slimdrive SD
or
TS 5000
on 2
nd
closing leaf side
The U-shaped driver has to be mounted on this side of the drive:
Valve lever of SD-IS
Driver on the rear side (= screwing surface),
nose 90° towards mark on the hexagon head,
front side
Driver on the rear side (= screwing surface),
observe mark as described above
Representation: TS 5000
