GEZE Powerturn, Installation And Service Instructions Manual

Page: 32 / 56

Powerturn
32
Installation
7.11 Installing the link arm bearing block
Follow separate installation instructions in situations involving the use of the sensor link arm.
X
Screw the link arm bearing block (1) on with
2 screws.
7.12 Inserting the counter piece
X
If there is insufficient space above the drive,
insert the counter piece before the drive
is installed.
X
Insert the counter piece (1) into the drive (2)
from above.
7.13 Installing the spindle extension
X
Insert the spindle extension (2) into the drive
from below.
X
Fasten the spindle extension using a countersunk
screw (1).
Tightening torque 6
+1
Nm.