Installation
GC 342 safety sensor
8
5
Installation
X
Before attaching the mounting plate, make sure that the sensor does not ob-
struct door movement. If the sensor is not positioned correctly it can become
crushed during opening of the door.
X
For optimum safety, install one module on each door wing side and inter-
connect the two modules using a door connection cable BS/BGS.
X
Keep a distance of at least 15 cm between the GC 342 and the radar detector.
1
2
1
Summary of Contents for GC 342
Page 1: ...EN Installation and operating instructions GC 342 safety sensor 167391 03 47 0159 V3 12 19...
Page 9: ...9 Installation GC 342 safety sensor 1 2 2 mm 5 mm 2 PZ2 3...
Page 11: ...11 Installation GC 342 safety sensor DIP ON 1 2 3 4 1 2 6 DIP ON 1 2 3 4 PZ1 1 2 7...
Page 19: ...19 Parameter setting GC 342 safety sensor SIO SIS SIS SIS SIS SIO SIS SIS SIS SIO SIS SIO...
