-2-
95
4.2
LED
AC220V
~
~
GRT8-TS1
Un
R
15 16 18
A1
A2
Wiring diagram
AC220V
~
~
Lo
ad
≤
1
6A
（
AC-1
）。
Lo
ad
＞
16A
（
AC-15
）。
LOAD
Setting instructions
1
:
Confirm that the Bluetooth switch of the mobile phone is on.
2
:
Open the mobile browser (Android) to scan the QR code (or as shown
in the figure below) and download the APP.You can also download the
APP by entering the download address in the browser.
3
:
Open the APP and set the timer according to the prompt.
GRT8-TS1
4: When multiple relays need to be set at the same time, multiple relays
will be searched in the equipment list. At this time, press and hold the
relay panel button to be set for 3 seconds to search the equipment list
again. At this time, the word wait setting will be added after changing the
equipment name of the relay. Click to enter the setting of the relay. After
2 minutes, the equipment name will return to normal. If you need to
restore the factory settings, such as forgetting the entry password, you
can press and hold the button for 10 seconds.
NOTE 1: if you need a detailed app operation manual, please contact
the after-sales department for it.
NOTE 2: when the timer needs to work in the automatic timing mode,
please confirm that the relay working state displayed in App
is automatic.
Indicator
1. The green indicator Un is used to indicate the power status of the relay.
After the power is turned on, the green indicator.The indicator light is
always on. When the panel key is pressed, the green indicator light will
flash.
2. The red indicator R is used to indicate the relay output status, and the
indication meaning is as follows:
15 16 18
15 16 18
http
: / /
www.geya.net
Disposal of Electrical Waste
All electrical waste should be
disposed of in compliance with
current WEEE regulations.
Caution
The products must be installed by qualified electricians. All and
any electrical connections of the product shall comply with
the appropriate safety standards.
http://47.111.97.64:8776/BTRen.apk
GRT8-TS1
Red LED R status
Relay status
16
18
15
16
18
15
3. When the red and green indicators flash at the same time, it indicates
that the time needs to be calibrated. Connect the relay with app again
to automatically calibrate the time.
Dimensions(mm)
GRT8-TS2
Red LED R status
Relay1 status
16
18
15
26
28
25
16
18
15
26
28
25
26
28
25
16
18
15
26
28
25
16
18
15
Relay2 status
