17
R
1°
2°
3°
R
R
t≥ 5s
t≥ 5s
t≥ 5s
7
8
9
10
11
12
I-O
N
0-O
FF
1
ON
R
3
2
t≥ 5s
CONFIGURAZIONE CONTATTO AUX1 -
AUX1 CONTACT SETUP -
NASTAVENÍ KONTAKTU AUX1
È possibile configurare il contatto ausiliario premendo per almeno
5s il tasto R e poi rilasciandolo. Il passaggio tra le diverse modalità è
confermato con lampeggi rossi del LED di sinistra
The auxiliary contact can be configured by pressing the button key R for at least 5s,
then releasing it. The switch between the different modes is confirmed when the
left red LED blinks.
Pomocný kontakt je možné nastavit tisknutím tlačítka R alespoň po dobu 5s a jeho
následným uvolněním. Přechod mezi modalitami je potvrzen bliknutími červené LED
vlevo.
Un lampeggio
LED rosso
One red LED flash.
Červená LED
dioda blikne
jednou.
NO (Default)
Tre lampeggi LED rosso
Three red LED flashes.
Červená LED dioda blikne třikrát
NC
Due lampeggi LED rosso.
Two red LED flashes.
Červená LED dioda blikne
dvakrát
Contatto intermittente (*)
Intermittent contact (*)
Přerušovaný kontakt (*)
(*) 1Hz per 30s (ripetuto ogni ora) -
1Hz per 30s (repeated every hour) -
1 Hz každých 30s (opakované každou hodinu)