JOINON EASY electric vehicle recharging unit
30
Remember that it could occasionally produce a small amount of condensation as a result of temperature changes.
Therefore, in addition to the protection it has, the charging stations must be monitored when they are used in
areas where it is probable that not all the previously indicated conditions will be satisfied.
Never connect the device to the voltage supply when there is condensation.
6.3.
SUPPORT AND FIXING SURFACE
To ensure correct heat dispersal and a good hold, the recharging stations must be installed on a perfectly vertical
wall.
The wall on which the device is fastened must be solid. It must be possible to drill the wall and insert wall plugs
and anchor bolts that are suitable for supporting the device weight.
6.4.
OPENING THE CASING
To open the casing from the main access, proceed as shown in the following figures.
1
2
Unscrew the 4 plastic screws located in the corners of the product.
