34
7.6 Feedback of application deletion by ETS
During the deletion of the application program (or application) by ETS, the message “EtS dL” will appear on
the screen and will remain if the device is not relaunched at the end of the procedure.
In this status, the normal download of the application from ETS can be resumed without relaunching the device
as long as the physical address has not been deleted as well.
If the physical address has been deleted, the device must be relaunched.
In both deletion situations (the device is relaunched by ETS without the physical address having been
deleted, or it is switched off and then back on again), the message “P ---“ will appear on the device to show
that the application has been deleted and a new download must be made. In any case, access the PROG
menu and activate programming mode to reprogram the device via ETS or make a factory reset.
For more details about programming mode (PROG status) or factory reset, refer to the relative paragraphs.
