46
|G5 – Owner’s Manual
RETRIGGER MASK
Retrigger Mask determines how many milliseconds must pass after a previously detected signal
before new signals are accepted - to prevent a "machine gun effect" or false trigger due to
vibrations after a beat. As another threshold value, this is one of the most important parameters
and it may take some time to find the best value. Ideally,
Retrigger Mask
should be set as low as
possible, with suppression from the "machine gun" effect and false triggers being addressed first by
the threshold parameter. In this context, you should only resort to Retrigger Mask if even high
threshold
values and high dynamic decay times (
Dyn Time
) cannot turn off the unwanted effects.
For DIY pads and cymbals, good
Retrigger Mask
values are in the range of approx. 4 to 12 milli-
seconds. High
Retrigger Mask
values make precise detection of fast drum rolls difficult.
Retrigger Mask Parameter Value range:
1-127
TRIGGER TYPE
If you use pads from other manufacturers, you have the option of matching the sensors (triggers)
in the connected pad with the input channels of the G5. Depending on the type of pad, choose
from "Single", "Dual" or "3-Way". It is also important to connect pads from other manufacturers
correctly.
"3-Way" can only be applied to the AUX1 channel. Please note that the AUX 2 channel is then no
longer displayed.
Summary of Contents for G5
Page 32: ......
Page 147: ...G5 Owner s Manual 133 376Ch Tap Head Rim 2nd MIDI note 0 not used 0 ...
