Nugget Ice Maker
HOW TO USE
7
Operation Guide
Drain the ice maker should be through the drain hoses at the back of the machine. Do not tip the ice maker over.
Notes
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
After fully drained, seal back the drain hoses and hang them up at the back of your ice maker.
Take the drain hoses off and put them in a sink or a bucket. Make sure that the end of the
hoses are lower than the bottom of the ice maker.
Remove the drain cap. The drain hoses will drain the water by themselves.
2.Drain Water
·
·
·
Manually add water by pouring potable water
into the water reservoir. Do not exceed the
“Max” water line.
Automatically add water by connecting tap
water with the 10ft 1/4” hose (included in the
package). Insert one end of it into
the water
inlet and connect the other end to water tap
through a faucet adapter (excluded from the
package). Water refill will stop if you turn off
the machine, or open and close the lid.
1.Two Ways of Adding Water
·
·
The water used for ice making needs to be between
46°F(8°C) and 82°F (28°C).
Notes
