Gevi GEKED401-U Instruction Manual Download Page 5

5.

6.

NOTE: 

Ensure that the On/Off switch is free of obstructions 

and the lid is firmly closed, the kettle will not turn off if the 
switch is constrained or if the lid is opening.
Lift the kettle from the power base and then pour the water.

NOTE: 

Operate carefully when pouring the water from your 

kettle as boiling water may result in scald, besides, don’t 
open the lid while the water in the kettle is hot.
The kettle will not re-boil until the On/Off switch is pressed 
down again. The kettle may be stored on the power base 
when not in use.

NOTE: 

Always disconnect the power supply when not use.

BOIL-DRY PROTECTION

If  you  accidentally  let  the  kettle  operate  without  water,  the 
boil-dry protection will automatically switch off the power. If 
this  occurs,  allow  the  kettle  to  cool  before  filling  with  cold 
water to reboil.

CLEANING AND MAINTENANCE

Always disconnect the appliance from the power outlet and 
cool it down completely before cleaning.

Never  immerse  the  kettle,  power  cord  or  power  base  in 
water, or allow moisture to contact with these parts.
Wipe the appearance of body with a damp cloth or cleaner, 
never use a poisonous cleaner.
Remember  to  clean  the  filter  at  intervals.  For  easier 
cleaning, detach the filter and then replace it after cleaning.

CAUTION: 

Do not use chemical, steel, wooden or abrasive 

cleaners to clean the outside of the kettle to prevent the 
gloss loss.
When  not  in  use,  the  power  cord  can  be  stored  at  the 
bottom of the appliance.
When not use or storage, the power cord may be wound 
under the bottom of kettle.

1.

2.

3.

4.

5.

Summary of Contents for GEKED401-U







Reviews: