Adjustments
2.
TIME
approximately 6 secs to 12 mins
Twilight switch (LUX)
Night operation
Day and night operation
The intermediate area can be used for various luminosity values
Coverage (METRES)
up to 8 m
1
Set the
control knob
(1) for test
operation
The sliding switch (2) on the twilight switch
has the following functions:
0 = OFF
: always set the switch to this
position when changing a light bulb
A = automatic operation
: the movement-
detector switches on the light when it
detects a movement and switches it off
again after the preselected time – if no
further movement has been detected.
1 = permanent light
Now carry out a
movement test
by pacing
around the area of coverage, in order to
adjust the settings as desired. (fig. 4).
Undesired areas can be excluded by using
the supplied masking band (3).
1
3
2
3
4
195°
GB
