manualshive.com logo in svg

Geuterbrueck EBC-2112, Installation Manual, Page: 10 / 36

Share
Download
Geuterbrueck EBC-2112 Installation Manual Download Page 10

G-Cam/E2 Series 

Installation

9

 

 

 

 

 

 

 

1. PART NAMES 

1.1. Rear View 

 

①

 

 

Power indicator 

It turns red when the power is on. 

②

 

LAN connector 

RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported) 

③

 

DC12V power connector 

DC12V power adaptor connection 

Refer to 

CONNECTION 

for more information. 

④

 

6 pin terminal block (Alarm In, Alarm Out, RS-485) 

Interface connector for alarm input, alarm output, and RS-485 communication 

Refer to 

CONNECTION

 for more information. 

⑤

 

Audio connectors (Audio In/Audio Out) 

Connectors for audio input and audio output 

⑥

 

Video out connector 

CVBS: 1.0Vp-p / 75Ω BNC 

⑦

 

PAL/NTSC button 

Pressing the button cycles through no video out, PAL, and NTSC. 

⑧

 

Reset button 

Use the button to restart the device or to reset it to factory default.  Refer to 

Reboot

 and 

Factory 

Default

 for more information. 

⑨

 

SD/SDHC card slot 

Up to 32GB supported. Class 4 and higher recommended for HD recordings. 

NTSC/PAL

①

②

⑨

③

④

⑤

⑥

⑦

⑧

* 

Model herein and its appearance are subject to change without any prior notice. 

Summary of Contents for EBC-2112





































Reviews:

No comments