Geutebruck 5.04720, Installation Manual

Page: 11 / 25

11
2.4. Camera Installation
The following description demonstrates how to directly install the camera to the ceiling or to the wall.
Step 1:
Loosen the two security screws on the camera with the supplied
security torx and open the dome cover.
Step 2:
Place the camera at the installation location. Mark the position of
the two screw holes indicated in the right figure on the ceiling/wall.
Then draw a line along the concave edge of the camera to indicate
the cable position.
Step 3:
On the ceiling/wall, draw a dot 20mm above the center of the
marked concave edge. Set the marked dot as the center, draw a
cable entry hole with 30mm diameter (radius as 15mm) and drill
the cable entry hole.