G-Case/WPH Series
Installation
7
Completion should look
like shown here.
CAUTION!
For Pole mount please respect the following order
a) At first install the bracket onto the pole mount adapter.
b) Guide the network cable through the bracket and pole
mount adaptor.
c) Mount this combination at the pole by using the two ten-
sion bands.
d) After this, please proceed at step three of wall mounting.
9.
Open the WPH cover and connect the power source
cable to the PSU like shown. Please refer to section
PSU connectors on page 9.
10.
Take the camera mounting plate, screw a lens onto
a camera and place the camera onto the plate.
11.
If the combination shows enough
space downwards, it can be
mounted directly on the plate.
