Getinge Castle MTP 1800 Series, Operating Manual, Page: 41 / 98

Series 1800 Washers
61301604086 2–19
Control Sequences
START UP
Turn the power on to the unit. The unit runs a diagnostic test.
Once the controller runs the test, the display screen shows
“MTP Model 18XX Cage and Bottle Washer. The unit is now in
the standby mode and ready to be used or programmed.
OPERATION
At the start of the processing period, the user activates the unit for
automatic operation. The unit automatically advances to the READY state
when the required operational conditions are attained.
The operator places the load to be cleaned in the chamber, closes the
chamber door, selects the desired cycle and presses the cycle start switch.
The washer automatically proceeds through the treatment process and
alerts the user when the process is complete. The user then opens the
chamber door and removes the cleaned load.
At the end of the processing period, the user places the unit in the
STANDBY mode. All processing functions stop and the sump and optional
treatment solution storage tanks automatically drain.
ALARM
If an alarm should sound at any time, press “SILENCE ALARM”
to turn the sound off, then follow the prompt on the display
screen to solve the problem. Press “ALARM ACK” on the key-
pad to return to the program.
HELP
A help screen is provided to assist the user. Pressing the
“HELP” button on the keypad will give the user direction on
what to do next.