Getinge 88-SERIES User Manual Download Page 18

Page: 18 / 24

Page 18 of 4

V133

FAULT INDICATIONS

Red lamp:
Alarm indication

P01 OP-SHORT-D

DOSE 1 LOW LEVEL

Handling alarm
or fault code

Handling alarms

Handling alarms appear on the display in plain text.

DOSE 1 LOW LEVEL

The machine cannot be started until the fault has been put right.

The following handling alarms can be displayed:

DOSE 1 LOW LEVEL

Empty container alarm 1, if detergent 1 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.

DOSE 2 LOW LEVEL

Empty container alarm , if detergent is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.

DOSE 3 LOW LEVEL

Empty container alarm 3, if detergent 3 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.

DOSE 4 LOW LEVEL

Empty container alarm 4, if detergent 4 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.

Note!
When the handling alarm is activated (appears on the display) there is always enough de-
tergent left for one run; in other words, if you have started a program it can run to the end.

Panel, soiled side

Red lamp:
Alarm indi-
cation

Handling alarm
or fault code

P01 OP-SHORT-D

DOSE 1 LOW LEVEL

Panel, clean side

J131

Summary of Contents for 88-SERIES

























Search results

Summary of Contents for 88-SERIES

Reviews:

Getinge 88-SERIES, User Manual, Page: 18 / 24

Search results

Summary of Contents for 88-SERIES

Reviews: