Getinge 86 SERIES, Technical Manual, Page: 59 / 228

Page 59 of 174
<Doc_TEC><Doc_502606900><Rel_B><Lang_GB>
P02 OP-D
F00 PWR FAILURE
Alarm
If the red lamp at O lights up, the process has been aborted because of a fault.
The display shows a fault code.
Acknowledging a fault code
Acknowledge the fault code by:
Make a note of the fault code •
Cancel the acoustic signal by pressing •
U
. The machine remains locked but the
program has been stopped. The display shows the password entry menu.
Correct the fault or call service personnel. •
Enter the password (558387) using the arrow keys and press •
S
. All liquid is
drained from the machine and the soiled-side door is unlocked*.
Open the door and remove the items. •
The items in the machine are not clean and must be washed again from the
beginning with a new program.
If the items are still hot, handle them with care to avoid burns.
* If the drain pump is faulty, water cannot be drained from the machine and the fault cannot be put right until the
door has been opened. The soiled-side door is unlocked as soon as the password is confirmed.