background image

 

43

 

Taking Care of the Tablet PC 

Location Guidelines 

 

For optimal performance, use the Tablet PC where the recommended 
temperature is between 0 

°

C (32 

°

F) and 50 

°

C (122 

°

F). (Actual operating 

temperature depends on product specifications.) 

 

Avoid placing the Tablet PC in a location subject to high humidity, 
extreme temperatures, mechanical vibration, direct sunlight, or heavy 

dust. Using in extreme environments for long periods can result in 
product deterioration and a shortened product life. 

 

Operating in an environment with metallic dust is not allowed. 

 

Place the Tablet PC on a flat and steady surface. Do not stand the Tablet 

PC on its side or store it in an upside-down position. A strong impact by 
dropping or hitting may damage the Tablet PC. 

 

Do not cover or block any ventilation openings on the Tablet PC. For 
example, do not place the Tablet PC on a bed, sofa, rug, or other similar 
surface. Otherwise, overheating may occur that results in damage to the 

Tablet PC. 

 

As the Tablet PC can become very hot during operation, keep it away 

from objects that are vulnerable to heat. 

 

Keep the Tablet PC at least 13 cm (5 inches) away from electrical 
appliances that can generate a strong magnetic field such as a TV, 

refrigerator, motor, or a large audio speaker. 

 

Avoid moving the Tablet PC abruptly from a cold to a warm place.  
A temperature difference of more than 10 

°

C (18 

°

F) may cause 

condensation inside the unit, which may damage the storage media. 

 

Summary of Contents for EX80
















































































Reviews: