Getac BWC BC-03 User Guide
R1.1
21
Chapter 7: Troubleshooting
If your issue is more detailed and has not been covered here, please
check the rest of the website to see if it has been answered.
http://us.getac.com/index.html
If you need assistance with any of the steps, or you cannot resolve your
issue, please contact a member of Getac Technology for further help.
FCC Warning statement
15.19 This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
15.105 This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
15.21
⚫
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate
equipment.
⚫
This device and its antenna must not be co-
located or operating in conjunction with any other antenna or tran
smitter.
⚫
End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
⚫
For product available in the USA/Canada market, only channel
1~11 can be operated. Selection of other channels is not possible
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment for body-worn configuration in direct
contact to the phantom.
