24
Analysing tests
You can analyse the tests using the data analysis
app. You can find further information in the
operating instructions supplied with this app.
After operation
Switching the equipment off
To exit the VKP 42 app, tap “Exit” in the main
menu.
To switch the data collector off press and hold
down the ON/OFF button on the data collector
for three seconds.
To switch the Com box off press the ON/OFF
button and hold it down for three seconds.
Charge the batteries of all components as
described on page 13.
Maintaining the equipment
The equipment does not require any particular
maintenance.
Removing external dirt deposits
Attention!
If fluids penetrate the equipment it may get
damaged.
Make sure that fluids cannot get into
the equipment.
Use only a slightly moistened cloth to
clean the equipment.
To remove dirt deposits rinse the equipment
with fresh water and wipe it with a clean, lint-
free cloth.
To remove any persistent residues use a
cleaning agent that is suitable for the material
and carefully wipe the equipment with a clean,
lint-free cloth.
Checking the component parts for damage
Be sure that all components are in good working
condition before and after using them.
Do not use damaged or defective components.
Replace any damaged or defective component.
