4
Important Notes
Danger
The terminal strips of the URS 2 are live during operation.
This presents the risk of severe cases of electric shock!
Cut off power supply before mounting or removing the terminal strips and the
housing cover.
Usage for the intended purpose
Use limit switch URS 2 only for signalling limits based on the 0/20 mA input.
Safety note
The equipment must only be installed and commissioned by qualified and competent staff.
Retrofitting and maintenance work must only be performed by qualified staff who – through adequate
training – have achieved a recognised level of competence.
Explanatory Notes
Scope of supply
URS 2
1 Limit switch URS 2
1 Installation manual
ATEX (Atmosphère Explosible)
According the the European Directive 94/9/EC the equipment must not be used in potentially explosive
areas.
Attention
The name plate specifies the technical features of the equipment. Note that any piece of
equipment without its specific name plate must neither be commissioned nor operated.
Note on the Declaration of Conformity / Declaration by the Manufacturer
For details on the conformity of our equipment according to the European Directives see our
Declaration of Conformity or our Declaration of Manufacturer.
The current Declaration of Conformity / Declaration of Manufacturer are available in the Internet under
www.gestra.en/documents or can be requested from us.
