Tools
n
Screwdriver (5.5/00)
Attention
n
To provide sufficient ventilation, ensure a minimum spacing of 0 mm between
adjacent units.
Installation
TRS 5-6
On supporting rail
. Clip temperature switch onto supporting rail.
. Loosen cover screws
1
and detach cover
3
from its base
2
.
3. Select cable entry
5
and remove corresponding seal.
On mounting panel
. Loosen cover screws
1
and detach cover
3
from its base
2
.
. Unscrew mounting clip
4
.
3. Drill hole
7
marked in the base to
∅
4.3 mm.
4. Select cable entry
5
/
6
and remove corresponding seal.
5. Fix base with two M4 screws onto mounting panel.
1
Cover screws
2
Base
3
Upper part of the housing
4
Mounting clip
5
Cable entry (flexible)
6
Cable entry (housing)
7
Fixing holes d = 4.3 mm
8
Supporting rail TS 35 x 5 DIN EN 500
Key
