28
LRR 1-60 - Installation & Operating Manual -
819692-00
What to do in the event of system malfunctions
In the event of malfunctions or faults that cannot be remedied with the aid of this Installation &
Operating Manual, please contact our service centre or authorised agent in your country.
Taking out of service
1.
Switch off the supply voltage and switch off the voltage to the equipment.
2.
Check that the equipment is not live.
3.
Unscrew and pull off the lower terminal strip, see
Fig. 5
A
;
B
4.
Release the slider holder on the base of the equipment, and detach the LRR 1-60 conductivity control-
ler from the support rail.
Disposal
Dispose of the conductivity controller in accordance with statutory waste disposal regulations.
Returning decontaminated equipment
If goods have come into contact with media that are hazardous to health, they must be
drained and decontaminated before being returned to GESTRA AG!
Such media include solid, liquid or gaseous substances, mixtures of these, or radiation.
GESTRA AG can accept returned goods only if accompanied by a completed and signed return
note and also a completed and signed declaration of decontamination.
The return confirmation and declaration of decontamination must be attached to the returned
goods and be accessible from the outside. Otherwise, the goods cannot be dealt with and will
be returned, carriage unpaid.
Please proceed as follows:
1.
Let GESTRA AG know about the return beforehand by e-mail or phone.
2.
Wait until you have received the return confirmation from GESTRA.
3.
Return the goods to GESTRA AG together with the completed return confirmation (and
declaration of decontamination).