13
Bringing into Service
continued
Tools
■
Screwdriver 5.5/100, DIN 5265, form A
■
Combination spanner size 36 mm AF, DIN 3113, form B
■
Torque wrench 20–160 Nm, DIN ISO 6789
Operation
BK 15
The BK 15 can be serviced (see
Maintenance
).
Maintenance
We recommend periodic tests and maintenance to ensure correct functioning of the equip-
ment. For critical applications, we recommend continuous monitoring.
Danger
The equipment is under pressure and hot during operation. Risk of injuries and severe
burns to the entire body.
Only perform installation and maintenance work when the equipment is not under pressure
(0 bar) and is cold (20 °C).
Before performing installation or maintenance work, isolate the equipment from upstream
and downstream pressure, and vent it.
Sharp edges on inner parts present a danger of cuts to hands.
Always wear industrial gloves when working on the equipment.
Checking the steam trap
The BK 15 steam trap can be checked during operation using a GESTRA VAPOPHONE
®
ultrasonic measuring unit or TRAP
test
®
.
If live steam leakage is detected, clean the trap or replace the regulator.
