Gestetner Administrator Reference 1, Administrator'S Manual

Page: 9 / 20

5
2. Configuring the Printer for
the Network
Configuring the Printer for the Network
with the Operation Panel
Configure the Network Interface
Board for the network using the oper-
ation panel.
Configure the printer for the network
using the operation panel.
The following table shows the opera-
tion panel settings and their default
settings. These are included in the
"Host Interface" menu.
Reference
For information about the "Host Inter-
face" menu, see "
Host Interface Menu "
in Administrator Reference 2 provid-
ed as a PDF file on the CD-ROM la-
beled "Operating Instructions".
*1
❍
means that this protocol is active.
A
Press
{{{{
Menu
}}}}
.
"Menu" appears on the panel dis-
play.
B
Press
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
to display "Host
Interface".
Menu:
Host Interface
C
Press
{{{{
Enter
}}}}
.
The following message appears on
the panel display.
Host Interface:
I/O Buffer
D
Press
{{{{U
U U
U}}}}
or
{{{{T
T T
T}}}}
to display "Net-
work Setup".
Host Interface:
Network Setup
Setting Name Value
IP Address 000.000.000.000
Subnet Mask 000.000.000.000
Gateway Address 000.000.000.000
Access Control
(Access Control Ad-
dress)
000.000.000.000
Access Mask
(Access Control Mask)
000.000.000.000
Network Boot None
Frame Type (NW)
(Frame type NetWare)
Auto
Active Protocol TCP/IP
❍
*1
NetWare
❍
*1
NetBEUI
❍
*1
AppleTalk
❍
*1
Ethernet Auto
On Line Menu
Job Reset
Escape
#
Enter Form Feed
Power Error Data In
ZDJS001N