Gesipa PowerBird, Operating Manual With Spare Parts List

Page: 21 / 148

21
GB
5.2 No spent mandrel disposal
Cause Corrective measures
Wrong nosepiece (A) used Exchange according to table (see 2.6)
Nosepiece worn (A) Replace
Mandrel jammed in jaws (D) Release mandrel, clean jaws and jaw
housing, oil sliding surface or replace jaws
(see 2.8)
Inside of steel head sleeve (B) dirty Clean (see 2.8)
Spent mandrel container (H) full Detach and empty
Passageway blocked Remove jammed mandrels and check for
trouble-free ejection (see 2.8)
5.3 Red lamp indicates fault
When pressing the trigger button
Cause Corrective measures
Riveting tool not in front end position Release trigger button
After releasing the trigger button
Cause Corrective measures
Front end position not reached Tighten jaw mechanism (see 2.8 and 5.2)
During pulling operation
Cause Corrective measures
Overload Use tool within working range as specified in
table (see 2.6.)
Electronics overheated Allow riveting tool to cool down in air
Battery discharged Charge or replace
Caution!
If faults occur that are indicated by the red lamp and cannot be rectified as described above,
have the riveting tool repaired by a skilled technician or send it in to the manufacturer.