20
GB
1.5
Safety instructions
Caution:
The following safety rules must be observed for adequate protection against electric
VKRFNVLQMXULHVRU¿UHKD]DUGV
•
The blind riveting tool should be used exclusively to set blind rivets!
•
Do not overload the tool; work within the prescribed work capacity.
•
1HYHUXVHWKHEOLQGULYHWLQJWRROLQDKXPLGRUZHWHQYLURQPHQWRUFORVHWRLQÀDPPDEOH
substances or gases. Risk of explosion!
•
Ensure that the battery is properly secured in the grip.
•
Remove the battery when the blind riveting tool is not in use and for repair/servicing
operations.
•
Do not use the blind riveting tool as a hammer.
•
When not in use, keep the blind riveting tool in a dry, closed room and out of the reach
of children.
•
When working with the tool, always wear protective goggles. Personal protection like
clothes, gloves, safety helmet, non-slip shoes, ear protection and anti-fall protection are
highly recommended.
•
The air inlets for the motor should not be obstructed. Do not introduce anything into them.
•
When setting the blind riveting tool down, make sure that it cannot fall.
•
Use only genuine spare parts for repair.
•
Repair work must be carried out by skilled workers. In case of doubt, always send the
blind riveting tool back to the manufacturer.
•
Do not use the tool outside of riveting holes! The blind rivet could be ejected from the
tool! Never turn the tool towards yourself or towards another person!
•
The mandrel container (n° 45) must be mounted on the blind riveting tool tool during
operation.
1.6
Starting procedure
•
Insert fully charged battery in correct position into housing.
•
Select correct nosepiece according to table 1.4.
•
To screw in the nosepiece, activate the switch and proceed until the stop position has
been reached at the back.
•
Then remove the battery. Screw in the nosepiece and tighten it using the wrench
provided. Put the battery back in and activate the switch.
Summary of Contents for PowerBird Pro
Page 3: ......
