Gesipa AccuBird Pro, Operating Manual With Spare Parts List

Page: 21 / 175

22
GB
2. Charger and battery
2.1 Technical data
2.1.1 Battery charger
Input voltage: 100 V-240 V~/50-60 Hz
Output voltage: 21 VDC
Output current: 2.5 A
Weight: 0.6 kg
2.1.2 Battery
Nominal voltage: 18.0 V
Number of cells: 5
Cell/capacity: Li-Ion; 2.1 Ah
Weight: Approx. 0.42 k g
1.11 Repairs
Repairs under warranty are carried out by the manufacturer. Repairs outside the warranty
period should only be carried out by
skilled technical personnel . Failure to observe the
assembly and setting procedures and operation by non-skilled personnel may result in seri-
ous damage to the blind rivet setting tool. In case of doubt, always send the blind rivet set-
ting tool back to the supplier or to GESIPA
®
.
1.10 Storage
The blind rivet setting tool should be stored in a dry place where there is no danger of frost.
2.2 Safety instructions
2.2.1 Battery charger
Caution:
The following safety rules must be observed for adequate protection against electric
shocks, injuries or fire hazards:
• The charger must be used exclusively to charge GESIPA
®
batteries.
• Check the cord, plug and charger regularly and have them repaired by Service or by an
authorised skilled specialist electrician when damaged.
• For repairs, use only genuine plugs and cords and genuine spare parts.