20
1)
Options / model variants
Original instructions
EN
Risk of tripping
To prevent accidents, always
carefully roll up the power cord.
Machines with hose and cord
reel:
1. Wind up the power cord
as illustrated with the plug
located in the center of the
cord reel.
2. Wind up the high pressure
hose as illustrated.
3. Place the spray lance into
the spray lance storage.
6.4
Rolling up the electri-
cal cord and storing
accessories
A
Store the cleaner in a dry heat-
ed location to protect against
freezing or protect per below
instructions:
1. Switch on the cleaner with
the main switch in position
.
2. Squeeze trigger of the
spray gun.
3. Turn off the water supply.
Do not remove the water
supply hose from the clean-
er, this will result in water
spraying everywhere.
4. Gradually pour antifreeze
(approx. 5 litres) into the
water tank (A).
5. The machine is protected
against freezing when an-
tifreeze mixture emerges
from the spray gun.
6. Release the trigger of the
spray gun.
7. Switch off the cleaner.
8. When the machine is put
into service again, the anti-
freeze solution can be col-
lected and stored for future
use.
6.5
Storing the cleaner
below 0°C (32°F)
CAUTION
•
Never startup a frozen cleaner. To avoid any possible dam-
age, store the cleaner temporarily in a heated room before
using it again.
•
Frost damages are not covered by the guarantee.
